#include#define uchar unsigned char#define uint unsigned intsbit DQ=P14;/ds18b20與單片機連接口unsigned char code str=0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f,0x39;/共陰數碼管字碼表unsigned char code str1=0x0bf,0x86,0x0db,0x0cf,0x0e6,0x0ed,0x0fd,0x87,0x0ff,0x0ef,0x39;/個位帶小數點字碼表unsigned char code wei=0x0fe,0x0fd,0x0fb,0x0f7;uchar data disdata5;uint tvalue;/溫度值uchar tflag;/溫度正負標志/*ds1820程序*/void delay_18B20(unsigned int i)/延時1微秒 while(i-);void ds1820rst()/*ds1820復位*/ unsigned char x=0;DQ = 1; /DQ復位delay_18B20(4); /延時DQ = 0; /DQ拉低delay_18B20(100); /精確延時大于480usDQ = 1; /拉高delay_18B20(40); uchar ds1820rd()/*讀數據*/ unsigned char i=0;unsigned char dat = 0;for (i=8;i0;i-) DQ = 0; /給脈沖信號 dat=1; DQ = 1; /給脈沖信號 if(DQ) dat|=0x80; delay_18B20(10); return(dat);void ds1820wr(uchar wdata)/*寫數據*/unsigned char i=0; for (i=8; i0; i-) DQ = 0; DQ = wdata&0x01; delay_18B20(10); DQ = 1; wdata=1; read_temp()/*讀取溫度值并轉換*/uchar a,b;ds1820rst();ds1820wr(0xcc);/*跳過讀序列號*/ds1820wr(0x44);/*啟動溫度轉換*/ds1820rst();ds1820wr(0xcc);/*跳過讀序列號*/ds1820wr(0xbe);/*讀取溫度*/a=ds1820rd();b=ds1820rd();tvalue=b;tvalue=8;tvalue=tvalue|a; if(tvalue0x0fff) tflag=0; else tvalue=tvalue+1;tflag=1; tvalue=tvalue*(0.625);/溫度值擴大10倍，精確到1位小數return(tvalue);/*/ void ds1820disp()/溫度值顯示 uchar flagdat; uchar i; disdata0=tvalue/1000;/百位數 disdata1=tvalue%1000/100;/十位數 disdata2=tvalue%100/10;/個位數 disdata3=tvalue%10;/小數位 if(tflag=0) flagdat=0x20;/正溫度不顯示符號 else flagdat=0x2d;/負溫度顯示負號:- if(disdata0=0x30) disdata0=0x20;/如果百位為0，不顯示 if(disdata1=0x30) disdata1=0x20;/如果百位為0，十位為0也不顯示 for(i=0;i150;i+) P2=wei0; P0=strdisdata3; delay_18B20(20); P2=wei1; P0=str1disdata2; delay_18B20(20); P2=wei2; P0=strdisdata1; delay_18B20(20); P2=wei3; P0=strdisdata0; delay_