1、1,2,參數表,安裝 編程 參數 0-* 操作和顯示 1-*負載和電機 2-*制動 3-*參考值/加減速 4-*限制/警告 5-*數字輸入/輸出 6-*模擬輸入/輸出 7-*PID控制器 13-*智能邏輯控制器 14-*特殊功能 15-*變頻器信息 16-*數據讀出 17-*編碼器,警告(WARNING)和報警(ALARM) 選件和附件,3,Installation,Mechanical Installation,Back to content,4,Installation,Mechanical Installation,Back to content,5,外殼類型,Mechanical In

2、stallation,Back to content,6,Installation,Electrical Installation,強電端子,電機端子,電源端子,制動及負載共享,繼電器,LC濾波器,外部24V供電,Back to content,7,Installation,Electrical Installation,Controlteminals,Back to content,8,Installation,Electrical Installation,Tension spring technology,接線,拆線,連接,Back to content,9,Installation,E

3、lectrical Installation,Control Terminal Diagram,Back to content,10,Installation,Electrical Installation,Back to content,11,Installation,Electrical Installation,開關 S201, S202, and S801 開關 S201 (A53) 、 S202 (A54) 用來選擇53/54端子的電流 (0-20 mA) 或電壓輸入(-10 to 10V) 開關 S801 (BUS TER.) 是 RS-485 口的終端電阻開關 (terminal

4、s 68 and 69). 默認值: S201 (A53) = OFF (電壓 input) S202 (A54) = OFF (電壓 input) S801 (終端電阻) = OFF,斷電狀態下?lián)軇娱_關， 撥動時最好摘下面板的底托， 小心用力！,Back to content,12,暗,Status,顯示亮度,Programming,Operating Instruction,恢復出廠值,按住同時上電，保持5秒 (or P.14-22),Or press for 3s,快捷 (direct access),Main Menu,Main Menu,-Key,1 x pushing - last

5、 changed Parameter 2 x pushing - Mainmenu,Important settings:,Back to content,13,Programming,Quick Menu,Back to content,14,Programming,Menu Structure,Back to content,15,Programming,Example,2-0*DC-Hold / DC . 2-1*Overvoltage 2-2*Mech. Brake,Brakefunctionen,16-0*Readout-All 16-1*Readout-M 16-3*Readout

6、 F 16-5*Readout-S,Date readouts,Back to content,16,Programming,Array Parameter,Array Number,Array Value,Back,Back,Cancel,or,Ok,or,Array Input,Back to content,17,ParametersOperation and Display,Group 0 Operation and Display,0-01 Language,Value:,*English (ENGLISH) 0 German (DEUTSCH)1 French (FRANCAIS)

7、2 Danish (DANSK) 3 Spanish (ESPANOL) 4 Italian (ITALIANO) 5 Swedish (SWEDISH) 6 Dutch (DUTCH) 7 Chinese (CHINESE) 10,Finnish (FINNISH) 20 English US (ENGLISH US) 22 Greek (GREEK) 27 Portuguese (PORTUGUESE) 28 Slovenian (SLOVENIAN) 36 Korean (KOREAN) 39 Japanese (JAPANESE) 40 Turkish (TURKISH) 41 Tra

8、ditional Chinese 42 Bulgarian 43,Serbian 44 Romanian (ROMANIAN) 45 Hungarian (HUNGARIAN) 46 Czech 47 Polish (POLISH) 48 Russian 49 Thai 50 Bahasa Indonesian (BAHASA INDONESIAN) 51,0-0* Operation / Display Parameters related to the fundamental functions of the frequency converter, function of the LCP

9、 buttons and configuration of the LCP display. 0-0* Basic Settings Parameter group for basic frequency converter settings.,Back to content,18,ParametersOperation and Display,Group 0 Operation and Display,0-02 Motor Speed Unit,Value:,* RPM 0 Hz 1,Select display of motor speed parameters (i.e. referen

10、ces, feedbacks and limits) in terms of shaft speed (RPM) or output frequency to the motor (Hz).,Back to content,0-03 Regional Settings,Value:,* International 0 US 1,Select International 0 to set par.1-20 Motor Power units to kW and the default value of par. 1-23 Motor Frequency to 50 Hz. Select US 1

11、 to set par.1-21 Motor Power units to HP and the default value of par. 1-23 Motor Frequency to 60 Hz.,19,ParametersOperation and Display,Group 0 Operation and Display,0-10 Active Set-up,Value:,0-1* Set-up Operations Define and control the individual parameter setups.,Factory setup 0 * Set-up 1 1 Set

12、-up 2 2 Set-up 3 3 Set-up 4 4 Multi set-up 9,Select the set-up to control the frequency converter functions. Factory Set-up 0 cannot be changed. It contains the Danfoss data set, and can be used as a data source when returning the other set-ups to a known state. Set-up 1 1 to Set-up 4 4 are the four

13、 separate parameter set-ups within which all parameters can be programmed. Select Active Set-up 9 for remote selection of set-ups using digital inputs and the serial communication port. This set-up uses the settings from par. 0-12 This option linked to. Stop the frequency converter before making cha

14、nges to open loop and closed loop functions. Use par. 0-51 Set-up copy to copy a set-up to one or all other set-ups.,Stop the frequency converter before switching between set-ups where parameters marked not changeable during operation have different values. To avoid conflicting settings of the same

15、parameter within two different setups, link the set-ups together using par. 0-12 This set-up linked to. Parameters which are not changeable during operation are marked FALSE in the parameter lists in the section Parameter Lists.,Back to content,20,ParametersOperation and Display,Group 0 Operation an

16、d Display,0-11 Edit Set-up,Value:,Select the set-up to be edited (i.e. programmed) during operation; either the active set-up or one of the inactive set-ups. Factory set-up 0 cannot be edited but it is useful as a data source to return the other set-ups to a known state. Set-up 1 1 to Set-up 4 4 can

17、 be edited freely during operation, independently of the active set-up. The Active set-up 9 can also be edited during operation. Edit the chosen set-up from a range of sources: LCP, FC RS485, FC USB or up to five fieldbus sites.,Factory setup 0 * Set-up 1 1 Set-up 2 2 Set-up 3 3 Set-up 4 4 Active se

18、t-up 9,Back to content,21,ParametersOperation and Display,Group 0 Operation and Display,0-12 This Set-up Linked to,Value:,To enable conflict-free changes from one set-up to another during operation, link set-ups containing parameters which are not changeable during operation. The link will ensure sy

19、nchronising of the not changeable during operation parameter values when moving from one set-up to another during operation. Not changeable during operation parameters can be identified by the label FALSE in the parameter lists in the section Parameter Lists. The par. 0-12 link set-up feature is use

20、d by Multi set-up in par. 0-10 Active Set-up. Multi set-up is used to move from one set-up to another during operation (i.e. while the motor is running).,* Not linked 0 Set-up 1 1 Set-up 2 2 Set-up 3 3 Set-up 4 4,Back to content,22,ParametersOperation and Display,Group 0 Operation and Display,Exampl

21、e: Use Multi set-up to shift from Set-up 1 to Set-up2 whilst the motor is running. Programme in Setup1 first, then ensure that Set-up 1 and Set-up 2 are synchronised (or .linked.). Synchronisation can be performed in two ways: 1. Change the edit set-up to Set-up 2 2 in par.0-11 Edit Set-up and set p

22、ar. 0-12 This Set-up Linked to to Set-up 1 1. This will start the linking (synchronising) process.,OR 2. While still in Set-up 1, copy Set-up 1 to Set-up2. Then set par. 0-12 to Set-up 2 2. This will start the linking process.,After the link is complete, par. 0-13 Readout: Linked Set-ups will read 1

23、,2 to indicate that all not changeable during operation parameters on are now the same in Set-up 1 and Set-up 2. If there are changes to a .not changeable during operation. parameter, e.g. par 1-30 Stator Resistance (rs), in Set-up 2, they will also be changed automatically in Set-up 1. A switch bet

24、ween Setup 1 and Set-up 2 during operation is now possible.,Back to content,23,ParametersOperation and Display,Group 0 Operation and Display,0-13 Readout: Linked Set-ups,Value:,Array 5,0-255* 0,View a list of all the set-ups linked by means of par. 0-12 This Set-up Linked to. The parameter has one i

25、ndex for each parameter set-up. Each set-up shows the set-up bitset to which it is linked.,Back to content,24,ParametersOperation and Display,Group 0 Operation and Display,0-2* LCP Display Define the display in the Graphical Logic Control Panel.,None 0 Profibus Warning Word 953 Readout Transmit Erro

26、r Counter 1005 Readout Receive Error Counter 1006 Readout Bus Off Counter 1007 Warning Parameter 1013 Running Hours 1501 kWh Counter 1502 Control Word 1600 Reference Unit 1601 Reference % 1602 Status Word 1603 Main Actual Value % 1605 Custom Readout 1609 Power kW 1610 Power hp 1611 Motor Voltage 161

27、2 Frequency 1613 Motor Current 1614 Frequency % 1615 Torque 1616 * Speed RPM 1617 Motor Thermal 1618 KTY Sensor Temperature 1619 Motor Angle 1620,Phase Angle 1621 Torque % 1622 DC Link Voltage 1630 BrakeEnergy/s 1632 BrakeEnergy/2 min 1633 Heatsink Temp. 1634 Inverter Thermal 1635 Inv. Nom. Current

28、1636 Inv. Max. Current 1637 SL Control State 1638 Control Card Temp. 1639 External Reference 1650 Pulse Reference 1651 Feedback Unit 1652 Digi Pot Reference 1653 Digital Input 1660 Terminal 53 Switch Setting 1661 Analog Input 53 1662 Terminal 54 Switch Setting 1663 Analog Input 54 1664 Analog Output

29、 42 mA 1665 Digital Output bin 1666 Freq. Input #29 Hz 1667 Freq. Input #33 Hz 1668,Back to content,25,ParametersOperation and Display,Group 0 Operation and Display,0-2* LCP Display Define the display in the Graphical Logic Control Panel.,Freq. Input #33 Hz 1668 Pulse Output #27 Hz 1669 Pulse Output

30、 #29 Hz 1670 Relay Output bin 1671 Counter A 1672 Counter B 1673 Prec. Stop Counter 1674 Fieldbus CTW 1 1680 Fieldbus REF 1 1682 Comm. Option STW 1684 FC Port CTW 1 1685 FC Port REF 1 1686 Alarm Word 1690 Alarm Word 2 1691 Warning Word 1692 Warning Word 2 1693 Ext. Status Word 1694 Ext. Status Word

31、2 1695 PCD 1 Write to MCO 3401 PCD 2 Write to MCO 3402 PCD 3 Write to MCO 3403 PCD 4 Write to MCO 3404 PCD 5 Write to MCO 3405 PCD 6 Write to MCO 3406,PCD 7 Write to MCO 3407 PCD 8 Write to MCO 3408 PCD 9 Write to MCO 3409 PCD 10 Write to MCO 3410 PCD 1 Read from MCO 3421 PCD 2 Read from MCO 3422 PC

32、D 3 Read from MCO 3423 PCD 4 Read from MCO 3424 PCD 5 Read from MCO 3425 PCD 6 Read from MCO 3426 PCD 7 Read from MCO 3427 PCD 8 Read from MCO 3428 PCD 9 Read from MCO 3429 PCD 10 Read from MCO 3430 Digital Inputs 3440 Digital Outputs 3441 Actual Position 3450 Commanded Position 3451 Actual Master P

33、osition 3452 Slave Index Position 3453 Master Index Position 3454 Curve Position 3455 Track Error 3456 Synchronizing Error 3457,Back to content,26,ParametersOperation and Display,Group 0 Operation and Display,0-2* LCP Display Define the display in the Graphical Logic Control Panel.,Actual Velocity 3

34、458 Actual Master Velocity 3459 Synchronizing Status 3460 Axis Status 3461 Program Status 3462,Idle Time 9913 Paramdb Requests in Queue 9914 Analog input X30/11 1675 Analog input X30/12 1676 Analog output X30/8 mA 1677,* Speed RPM1617,* Motor Current A1614,* Power KW1610,Back to content,27,Parameter

35、sOperation and Display,Group 0 Operation and Display,* Frequency Hz1613,* Reference %1602,0-25 個人菜單,Value:,Array 20,0-9999,最多可以定義50個顯示在Q1個人菜單中的參數。該菜單可通過LCP上Quick Menu鍵訪問。如果設為0000則會刪除該參數。,Back to content,28,ParametersOperation and Display,Group 0 Operation and Display,Disabled0 *Enabled 1 Password 2,

36、Select Disabled 0 to avoid accidental start of the frequency converter in Hand mode. Select Password 2 to avoid unauthorised start in Hand mode. If par. 0-40 is included in the Quick Menu, then define the password in par. 0-65 Quick Menu Password.,0-4* LCP Keypad Enable and disable individual keys o

37、n the LCP keypad.,Disabled0 *Enabled 1 Password 2,Select Disabled 0 to avoid accidental stop of the frequency converter. Select Password 2 to avoid unauthorised stop. If par. 0-41 is included in the Quick Menu, then define the password in par. 0-65 Quick Menu Password.,Back to content,29,ParametersO

38、peration and Display,Group 0 Operation and Display,Disabled0 *Enabled 1 Password 2,Select Disabled 0 to avoid accidental start of the frequency converter in Auto mode. Select Password 2 to avoid unauthorised start in Auto mode. If par. 0-40 is included in the Quick Menu, then define the password in

39、par. 0-65 Quick Menu Password.,Disabled0 *Enabled 1 Password 2,Press Reset and select Disabled 0 to avoid accidental alarm reset. Press Reset and select Password 2 to avoid unauthorised resetting. If par. 0-43 is included in the Quick Menu, then define the password in par. 0-65 Quick Menu Password.,

40、Back to content,30,ParametersOperation and Display,Group 0 Operation and Display,0-5* Copy / Save Copy parameter settings between set-ups and to/from the LCP.,* No copy 0 All to LCP 1 All from LCP 2 Size indep. from LCP 3 File from MCO to LCP4 File from LCP to MCO5,Select All to LCP 1 to copy all pa

41、rameters in all set-ups from the frequency converter memory to the LCP memory. Select All from LCP all 2 to copy all parameters in all set-ups from the LCP memory to the frequency converter memory. Select Size indep. from LCP 3 to copy only the parameters that are independent of the motor size. The

42、latter selection can be used to programme several drives with the same function without disturbing motor data. This parameter cannot be adjusted while the motor is running.,Back to content,31,ParametersOperation and Display,Group 0 Operation and Display,* No copy 0 Copy to set-up1 1 Copy to set-up2

43、2 Copy to set-up3 3 Copy to set-up44 Copy to all5,Select Copy to set-up 1 1 to copy all parameters in the present edit set-up (defined in par. 0-11 Edit Set-up) to Set-up 1. Likewise, select the option corresponding to the other set-up(s). Select Copy to all 9 to copy the parameters in the present s

44、et-up over to each of the set-ups 1 to 4.,Back to content,32,ParametersLoad and Motor,Group 1 Load and Motor,1-0* General Settings Define whether the frequency converter operates in speed mode or torque mode; and whether the internal PID control should be active or not.,* Speed open loop 0 Speed clo

45、sed loop 1 Torque 2 Process 3,Select the application control principle to be used when a Remote Reference (via analog input) is active. A Remote Reference can only be active when par. 3-13 Reference Site is set to 0 or 1. Speed open loop 0: Enables speed control (without feedback signal from motor)

46、with automatic slip compensation for almost constant speed at varying loads. Compensations are active but can be disabled in the Load/Motor par. group 1-0*. Speed closed loop 1: Enables encoder feedback from motor. Obtain full holding torque at 0 RPM. For increased speed accuracy, provide a feedback

47、 signal and set the speed PID control. Torque 2: Connects the encoder speed feedback signal to the encoder input. Only possible with .Flux with motor feedback. option, par. 1-01 Motor control principle. Process 3: Enables the use of process control in the frequency converter. The process control par

48、ameters are set in par. groups 7-2* and 7-3*,Back to content,33,ParametersLoad and Motor,Group 1 Load and Motor,Back to content,Speed control open loop,Parameters related 0-02 Motor Speed Unit (Hz/RPM) 1-01 Motor Control Principle 1-03 Torque Characteristics 3-00 Reference Range 3-02 Minimum Referen

49、ce 3-03 Maximum Reference 3-04 Reference Function 4-10 Motor Speed Direction 4-11 Motor Speed Low Limit (RPM) 4-12 Motor Speed Low Limit (Hz) 4-13 Motor Speed High Limit (RPM) 4-14 Motor Speed High Limit (Hz) 4-16 Torque Limit Motor Mode 4-18 Current Limit 4-19 Max Output Frequency 4-50 Warning Curr

50、ent Low 4-51 Warning Current High 4-52 Warning Speed Low 4-53 Warning Speed High 4-54 Warning Reference Low 4-55 Warning Reference High,34,ParametersLoad and Motor,Group 1 Load and Motor,U/f 0 * VVC plus1 Flux sensorless (FC 302 only) 2 Flux with motor feedback (FC 302 only)3,Select which motor cont

51、rol principle to employ. Select U/f 0, a special motor mode, for parallel connected motors in special motor applications. When U/f is selected the characteristic of the control principle can be edited in par. 1-55 and 1-56. Select VVCplus 1 for a Voltage Vector Control principle suitable for most ap

52、plications. The main benefit of VVCplus operation is that it uses a robust motor model. Select Flux sensorless 2, i.e. Flux Vector control without encoder feedback, for simple installation and robustness against sudden load changes. Select Flux with encoder feedback 3 for very high accuracy speed an

53、d torque control, suitable for the most demanding applications. The best shaft performance is normally achieved using either of the two Flux Vector control modes Flux sensorless 2 and Flux with encoder feedback 3.,Back to content,35,ParametersLoad and Motor,Group 1 Load and Motor,* 24 V encoder 1 MC

54、B 102 2 MCB 103 3 MCO 305 encoder 1 4 MCO 305 encoder 2 5,Select the interface at which to receive feedback from the motor. 24V encoder 1 is an A and B channel encoder, which can be connected to the digital input terminals 32/33 only. Terminals 32/33 must be programmed to no operation. MCB 102 2 is

55、an encoder module option which can be configured in par. group 17-1* This parameter appears in FC 302 only. MCB 103 3 is an optional resolver interface module which can be configured in parameter group 17-5* MCO 305 Encoder 1 4 is encoder interface 1 of the optional programmable motion controller MC

56、O 305. MCO 305 Encoder 2 5 is encoder interface 2 of the optional programmable motion controller MCO 305.,Back to content,36,ParametersLoad and Motor,Group 1 Load and Motor,* Constant torque0 Variable torque1 Auto energy optim.2,Select the torque characteristic required. VT and AEO are both energy s

57、aving operations. Constant torque 0: The motor shaft output will provide constant torque under variable speed control. Variable Torque 1: The motor shaft output will provide variable torque under variable speed control. Set the variable torque level in par. 14-40 VT Level. Automatic Energy Optimizin

58、g function 2: This function automatically optimises energy consumption by minimising magnetisation and frequency via par. 14-41 AEO Minimum Magnetisation and par. 14-42 Minimum AEO Frequency.,Back to content,37,ParametersLoad and Motor,Group 1 Load and Motor,* High torque0 Normal torque1,High torque

59、 0 allows up to 160% over torque. Normal torque 1 is for oversized motor allows up to 110% over torque.,Speed open loop0 Speed closed loop1 * As conf. mode par. 1-002,Select which application configuration mode (par. 1-00), i.e. application control principle, to use when a Local (LCP) Reference is active. A Local Reference can be active only when par. 3-13 Reference Site is set to 0 or 2. By default the local reference is active in Hand Mode only.,Back to content,38,ParametersLoad and Motor,Group 1 Load and Motor,1-1* Motor selection Parameter group for settin