5.點播通訊-無線通訊實驗內容：實驗多終端通訊掌握點對點通訊提示：如果3個模塊可將其中一個節點做路由器，再觀察現象更清楚。將程序分別到協調器、終端，連接串口。如果3個模塊，可將其中一個做路由器，上電可以看到只有協調器在一個周期內收到信息。也就是說路由器和終端均與地址為0x00（協調實驗詳解：打開..\EB2530\第5zigbee協議棧應用與組網5.點播通訊-typedef {afAddrNotPresent= = //點播方 = //組播方式 = //廣播方式}typedef{{ //短地址ZLongAddr_t //IEEE地址} //傳送模式byte //端點號uint16 //usedfortheINTER_PAN}協調器的地址規定為增加發送函數，相信現在大家對下面的函數應該很熟悉了。voidSampleApp_Send_P2P_Message(void{uint8 {}{//Erroroccurredinrequestto}}#define #define #define 搜索SampleApp_ProcessEvent，找到if(events&SAMPLEAPP_SEND_PERIODIC_MSG_EVT修改成如下代碼：if(events&SAMPLEAPP_SEND_PERIODIC_MSG_EVT{//Sendtheperiodic//SampleApp_SendPeriodicMessage();//注釋原來的發送函數 //增加點播的發送函數//Setuptosendmessageagaininnormalperiod(+alittlejitter)osal_start_timerEx(SampleApp_TaskID,SAMPLEAPP_SEND_PERIODIC_MSG_EVT,(SAMPLEAPP_SEND_PERIODIC_MSG_TIMEOUT+(osal_rand()&0x00FF))//returnunprocessedreturn(events^}在接收方面，搜索找到SampleApp_MessageMSGCB，我們進行如下修改（增加紅色部分void ingMSGPacket_t*pkt{uint16{case //提示接收到數據HalUARTWrite(0,pkt->cmd.Data,pkt->cmd.DataLength);//串口輸出接收到的數據HalUARTWrite(0,"\n",1); //回車換行casecaseflashTime=BUILD_UINT16(pkt->cmd.Data[1],pkt->cmd.Data[2]);HalLedBlink(HAL_LED_4,4,50,(flashTime/4));}}協調器不需要周期發數據，注釋協調器的周期caseif(//(SampleApp_NwkState==DEV_ZB_COORD)||{//Star dingtheperiodicmessageinaregularinte