1、exercise of mechanisms and machine theory name:class:order number:grade:name:class:order number:grade:(a)(b)Exercise of mechanisms and machine theory name:class:order number:grade:name:class:order numberAnisms as follows，can you point out these mechanisms have a determined motion or not？(The link wi

2、th arrow is driving link)(d)(c)exercise of mechanisms and machine theory name:class:order NUSexercise of mechanisms and machine theory name:class:order number:grade:name:class:order number:grade:determine the type of four-bar linkage holding different link as frame？-嗯？exercise of mechanisms and mach

3、ine theory name:class:order number:grade:name:class:order number:grade:BCD shown as below b=100mm c=80mm d=110mm(1)find the range of the values for the length lab of link ab if the linkage is either crr(2)can the linkage be a double-crank Why？exercise of mechanisms and machine theory name:class:orde

4、r number:grade:name:class:order number:grade:shown as below lab=80mm lbc=180mm LCD=230mm lad=200 the driver BC rotates at a constant speed . find the minimum transmission Ge exex determine the type of the revolu te If the side link ab is a driver and rotates at a constant speed(a)Find the pressure a

5、ngle and transmission and transmission find The maximum pressure angle max and The minimum transmission angle min exercise of mechanisms and machine theory name:class:order numms has two results(lbc)exercise of mechanisms and machine theory name:class:order number:grade:name:classexercise of mechani

6、sms and machine theory name:class:order number:grade:name:class:order number:grade:ng offset knife-edge follower let the lift MMH 4.2，cam angle for rise 0 0 120，cam angle for outer dwell 0 s 60，cam angle Cam angle for inner。And return as cosine acceleration motion curve . please draw the displacemen

7、t curve of the follower . exercise of mechanisms And machine theerAss: ordernumber: grade: 14 5-3顯示了偏置滾子從動件盤式凸輪機構。已知凸輪輪廓由三個圓弧和直線組成，其中心為O、O/和O/，半徑分別為mmrmmrmmr536,18，18，偏移e=8mm。滾子半徑mmrT5。當前要求：1)，繪制凸輪的理論輪廓曲線和基準圓。2)、從動輪的移動H、推進運動角度A和返回運動角度C。3)、顯示圖標位置從動件的變位S和凸輪機構的壓力角。4)、凸輪從圖標位置旋轉到600時，顯示從動機構的偏移S/和凸輪機構的壓力角。exercise of mechanisms and machine theory name:class:order number:grade:name:class:order number:grade:let the radius of base circle mmrb 30 the radius of curvature of the involut