1、#include #include #include unsigned char code table= 0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90,0x40;unsigned char sec; /定義計數值，每過1 秒，sec加1unsigned int tcnt; /定時中斷次數bit write=0; /寫24C08 的標志；sbit gewei=P25; /個位選通定義sbit shiwei=P24; /十位選通定義/24C08 讀寫驅動程序/sbit scl=P34; / 24c08 SCLsbit sda=P35; / 24

2、c08 SDAvoid delay1(unsigned char x) unsigned int i;for(i=0;ix;i+);void flash() ; ; void x24c08_init() /24c08 初始化子程序scl=1; flash(); sda=1; flash();void start() /啟動（I方C）總線sda=1; flash(); scl=1; flash(); sda=0; flash(); scl=0; flash();void stop() /停止（I方C）總線sda=0; flash(); scl=1; flash(); sda=1; flash()

3、;void writex(unsigned char j) /寫一個字節 unsigned char i,temp;temp=j;for (i=0;i8;i+)temp=temp1; scl=0; flash(); sda=CY; flash(); scl=1; flash();scl=0; flash(); sda=1; flash();unsigned char readx() /讀一個字節unsigned char i,j,k=0;scl=0; flash(); sda=1;for (i=0;i8;i+)flash(); scl=1; flash();if (sda=1) j=1;els

4、e j=0;k=(k1)|j;scl=0;flash(); return(k);void clock() /(I方C）線時鐘unsigned char i=0;scl=1; flash();while (sda=1)&(i255)i+;scl=0; flash();/從24c02 的地址address 中讀取一個字節數據/unsigned char x24c08_read(unsigned char address)unsigned char i;start(); writex(0xa0);clock(); writex(address);clock(); start();writex(0xa

5、1); clock();i=readx(); stop();delay1(10);return(i);/向24c02 的address 地址中寫入一字節數據info/void x24c08_write(unsigned char address,unsigned char info)EA=0;start(); writex(0xa0);clock(); writex(address);clock(); writex(info);clock(); stop();EA=1;delay1(50);/24C08 讀寫驅動程序完/void Delay(unsigned int tc) /延時程序whil

6、e( tc != 0 )unsigned int i;for(i=0; i100; i+);tc-;void LED() /LED顯示函數shiwei=0; P0=tablesec/10; Delay(8); shiwei=1;gewei=0; P0=tablesec%10; Delay(5); gewei=1;void t0(void) interrupt 1 using 0 /定時中斷服務函數TH0=(65536-50000)/256; /對TH0 TL0 賦值TL0=(65536-50000)%256; /重裝計數初值tcnt+; /每過250ust tcnt 加一if(tcnt=20) /計滿20次（1 秒）時tcnt=0; /重新再計sec+;write=1; /1 秒寫一次24C08if(sec=100) /定時100 秒，在從零開始計時sec=0;void main(void)TMOD=0x01; /定時器工作在方式1ET0=1; EA=1;x24c08_init(); /初始化24C08sec=x24c08_read(2);/讀出保存的數據賦于secTH0=(65536-50000)/256; /對TH0 TL0 賦值TL0=(65536-50000)%256; /使定時器0.05 秒