1、怎樣將android移植到fs2410開發板上1已經可以通過nfs在fs2410開發板上運行二、目前缺陷1沒有校準2android中時鐘停止，結束zygote進程，系統重啟，時鐘更新，但再次停止不動3串口無法與gprs模塊通訊三、移植步驟一、移植android內核到fs2410開發板上1、下載linux-2.6.25-android-1.0_r1.tar.gz2、將內核解壓到用戶名目，如/home/wangan/kernel.git3、進入kernel.git文件夾，如cd "/kernel.git/4、修改arch/arm/plat-s3c24xx/common-smdk.c文件中

2、的nand flash分區設置，如gedit arch/arm/plat-s3c24xx/common-smdk.c修改static struct mtd_partition smdk_default_nand_part結構體為：static struct mtd_partition smdk_default_nand_part = 0 = .name = "boot agent",.size = sz_256k,.offset = 0,= .name = " kernel",.offset = sz_256k,.size = sz_2m - sz_25

3、6k,= .name = "file system",.offset = sz_2m,.size = sz_32m - sz_2m,= .name = "other",.offset = sz_32m,.size = sz_32m,;5、在網站上下載ia32 gnu/linux tar。6、將文件解壓到用戶名目，如/home/wangan/arm-2008q37、進入arm-2008q3/bin文件夾，如cd "/arm-2008q3/bin/8、添加當前路徑進入環境變量，如export path=$pwd:$path，或修改"/.b

4、ashrc文件并重新登錄9、進入內核文件夾，如cd "/kernel.git/10、修改makefile文件，如gedit makefile更改arch和cross_compilearch ?= $(subarch)arch ?= armcross_compile ?= arm-eabi-cross_compile ?= arm-none-eabi-11、從華清遠見linux-內核壓縮包中提取.config文件（注重：config前面有個“.”）放入kernel.git文件夾12、運行make menuconfig(1) 確保system type - system t

5、ype ()中的內容為samsung , s3c2412, s3c2413, s3c2440, s3c2442, s3c2443(2) 確保system type - s3c2410 machines - smdk2410/a9m2410被勾選(3) 取消挑選與goldfish相關的內容device drivers - character devices - goldfish tty driverdevice drivers - power supply class support - goldfish battery driver (new)device drivers - real tim

6、e clock - goldfish (new)device drivers - graphics support - support for frame buffer devices - goldfish framebuffer(4) 挑選s3c2410 相關的內容device drivers - graphics support - support for frame buffer devices - * s3c2410 lcd framebuffer supportdevice drivers - graphics support - bootup logo - standard bla

7、ck and white linux logodevice drivers - graphics support - bootup logo - standard 16-color linux logodevice drivers - graphics support - bootup logo - standard 224-color linux logo(5) 選中android內核必需選項kernel features - use the arm eabi to compile the kernelgeneral setup - use full shmem filesystemgene

8、ral setup - enable android's shared memory subsystemsystem type - support thumb user binariesdevice drivers - android - android log driverdevice drivers - android - * binder ipc driver(6) 盡量選中android內核可選選項device drivers - android - ram buffer consoledevice drivers - android - android timed gpio

9、driverdevice drivers - android - only allow certain groups to create sockets(7) 其余config選項，如系統支持請一并挑選config_android_power =yconfig_android_power_stat =yconfig_android_power_alarm =y（可以在kconfig文件中查找android_power等字段舉行挑選，或者挺直修改.config文件）13、退出并保存.config二、移植lcd驅動到linux-2.6.25內核1、 進入kernel.git文件夾，如cd &quo

10、t;/kernel.git/2、 修改arch/arm/mach-s3c2410/mach-smdk2410.c文件，如gedit arch/arm/mach-s3c2410/mach-smdk2410.c(1) 增強頭文件include asm/arch/fb.h(2) 增強兩給結構體static struct s3c2410fb_display smdk2410_lcd_cfg _initdata = .lcdcon5 = s3c2410_lcdcon5_frm565 |s3c2410_lcdcon5_invvline |s3c2410_lcdcon5_invvframe |s3c2410

11、_lcdcon5_pwren |s3c2410_lcdcon5_hwswp,.type = s3c2410_lcdcon1_tft,.width = 320,.height = 240,.pixclock = 174757,.xres = 320,.yres = 240,.bpp = 16,.left_margin = 16,.right_margin = 59,.hsync_len = 9,.upper_margin = 2,.lower_margin = 6,.vsync_len = 16,;static struct s3c2410fb_mach_info smdk2410_fb_inf

12、o _initdata = .displays = &smdk2410_lcd_cfg,.num_displays = 1,.default_display = 0,.gpccon = 0xaa955699,.gpccon_mask = 0xffc003cc,.gpcup = 0x0000ffff,.gpcup_mask = 0xffffffff,.gpdcon = 0xaa95aaa1,.gpdcon_mask = 0xffc0fff0,.gpdup = 0x0000faff,.gpdup_mask = 0xffffffff,.lpcsel = 0xf82,;(3) 在smdk241

13、0_init（）函數中增強s3c24xx_fb_set_platdata(&smdk2410_fb_info);三、移植觸摸屏驅動到linux-2.6.25內核（參見基于linux-2.26.5內核的fs2410開發板觸摸屏驅動移植）并制作zimage文件，如make這里提一下，確保已經勾選device drivers - input device support - * event interface，本人曾經在這里徘徊，謝謝游教師悉心教誨！四、制作支持armv4的android根文件系統1、從下載android的armv4版本根文件2、在/dev下增強null和console兩個設備節點mknod -m 660 null c 1 3mknod -m 660 console c 5 13、在u-boot中修改啟動參數init為/init，完整的指令行如：root=nfs nfsroot=169.254.7